السيرة الذاتية
Personal Data
الاسمسيفا سانكاران غوفيندا سامي
الدرجة العلميةأستاذ مساعد
القسمMechanical
بريد الكليةsivasankaran@qec.edu.sa
البريد الشخصيsivasankarangs1979@gmail.com
الجنسيةالهند
التحويلة5024
رقم المكتب
التخصص العامهندسة ميكانيكية
التخصص الدقيقتصنيع-انتاج
 
Academic Degrees
Nr.DegreeMajorInstituteCountryYear
1 Ph.D Production Engineering National Institute of Technology, Tiruchirappalli (Government of India), Tamilnadu India 2011
2 M.Sc Manufacturing Technology National Institute of Technology, Tiruchirappalli (Government of India), Tamilnadu India 2008
3 B.Sc Mechanical Engineering Thanthai Periyar Government Institute of Technology, Vellore (University of Madras), Tamilnadu India 2001
 
Academic Experiences
Nr.TitleFT/PTPlaceCountryStart YearFinish Year
1 Staff Member FT Department of Mechanical Engineering, College of Engineering, Qassim University, Kingdom of Saudi Arabia Saudi Arabia 2016 Till
2 Staff Member FT School of Mechanical and Electromechanical Engineering, Institute of Technology, Hawassa University Others 2014 2016
3 Staff Member FT KPR Institute of Engineering and Technology (Affiliated to ANNA University, Chennai), Coimbatore, Tamilnadu India 2011 2014
4 Staff Member FT JJ College of Engineering and Technology, Tiruchirappalli, Tamilnadu India 2007 2008
5 Staff Member FT Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu India 2001 2007
 
Administrative Work
Nr.Job NamePlaceFT/PTCountryStart YearFinish Year
1 M.Sc Industrial Design Course Development Qassim University PT Saudi Arabia 2016 Current
2 Curriculum Development Committee Secretary School of Mechanical and Electromechanical Engineering, Institute of Technology, Hawassa University PT Others 2014 2016
3 Research and Development coordinator KPR Institute of Engineering and Technology, Coimbatore, Tamilnadu PT India 2012 2014
4 Management Representative for ISO 9001 : 2000 Quality Standard Programme Thanthai Roever Institute of Polytechnic College PT India 2004 2006
 
Non-academic Experiences
Nr.TitlePlaceFT/PTCountryStart YearFinish Year
1 Entrepreneurship Development Programme Cell Coordinator KPR Institute of Engineering and Technology, Coimbatore, Tamilnadu PT India 2013 2014
2 Deputy Warden for Hostel Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu PT India 2004 2007
 
Teaching Courses
Nr.Course TitleUndergraduate/ Postgraduate
1 Advanced Engineering Materials Postgraduate
2 Advanced Manufacturing Processes Postgraduate
3 Selected Topics in Manufacturing Processes Postgraduate
4 Manufacturing Processes (1) Undergraduate
5 Manufacturing Processes (2) Undergraduate
6 Materials Engineering Undergraduate
7 Mechanical Drawing Undergraduate
8 Mechanical Engineering Design (1) Undergraduate
9 Mechanical Engineering Design(2) Undergraduate
10 Mechanics of Materials Undergraduate
11 Mechanics of Materials Lab Undergraduate
12 Modern Engineering materials Undergraduate
13 Statics Undergraduate
14 Tool Manufacturing Undergraduate
 
 
Training Courses
Nr.TypeCategoryCourse TitlePlaceCountryStart Finish Hours
1 Trainee_Outside_QEC Educational Participated Two Weeks Short Term Training Programme (STTP) on “Recent Advances in Modeling & Simulation of Joining of Materials” Department of Production Engineering, NIT, Trichy, sponsored by MHRD, Government of India India 29/12/2008 10/01/2009 90
2 Trainer_Outside_QEC Educational ? Delivered a keynote speech of in CSIR Sponsored Two Days National Level Seminar On “Mechanics, Processing and Characterization of High Performance Hybrid Composite Materials” Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore, August 23rd and 24th 2013 India 23/08/2013 24/03/2013 4
3 Trainer_Outside_QEC Educational CNC Training programme co-ordinator KPR Institute of Technology, Coimbatore India 2011 2014 120
4 Trainer_Outside_QEC Educational CNC Training programme co-ordinator Thanthai Roever Institute of Polytechnic College, Perambalur, Tamilnadu India 2003 2006 360
5 Trainer_Outside_QEC Educational Delivered a keynote speech of “(i) Processing methods of Thermoset Composites, (ii) Processing methods of Thermoplast Composites” TEQIP sponsored FDP on “Composites – Mechanics, Processing and Characterization”, PES Institute of Technology, Bangalore, India India 20/03/2013 22/03/2013 4
6 QEC_Trainee Educational NEW FACULTY MENTORING PROGRAM COLLEGE OF ENGINEERING, QASSIM UNIVERSITY Saudi Arabia 19/02/2017 23/02/2017 45
7 Trainee_Outside_QEC Educational Participated in Two Days workshops on “Micro-Machining” Department of Production Engineering on June 18th & 19th, 2008 NIT, Trichy India 18/06/2008 19/06/2008 16
8 QEC_Trainee Educational Blockboard Learning Management System Level One Qassim University Saudi Arabia 15/03/2017 16/03/2017 8
9 Trainee_Outside_QEC Educational Participated Two Weeks Short Term Training Programme (STTP) on “Mechatronics” Shanmuga Polytechnic College, SASTRA University sponsored by AICTE & ISTE, Government of India India 11/11/2002 22/11/2002 90
10 Trainer_Outside_QEC Educational Delivered a keynote speech in a one day seminar towards “Processing of Polymeric Matrix Composite Materials” Department of Mechanical Engineering, Arulmurugan College of Engineering, Thenilay, Karur India 11/03/2016 11/03/2016 3
11 Trainer_Outside_QEC Educational Delivered a keynote speech in a one week Faculty Development Programme on “Engineering Drawing” Department of Mechanical Engineering, KPR Institute of Engineering and Technology, Coimbatore India 09/07/2012 13/07/2012 16
12 Trainee_Outside_QEC Educational Participated in Two Days workshops on “Optimization Algorithms for Manufacturing Applications” Department of Production Engineering on June 9 & 10th, 2006 sponsored by TEQIP, NIT, Trichy India 09/06/2006 10/06/2006 16
13 Trainee_Outside_QEC Educational Participated in Two days workshops on “Computer Aided Manufacturing” Department of Production Engineering on December, 2 & 3rd, 2005 sponsored by TEQIP, NIT, Trichy India 02/12/2005 03/12/2005 16
 
 
Member in Professional Organization
Nr.TitlePlaceCountryDate
1 Centre of Research, ANNA University Chennai KPR Institute of Engineering and Technology, Coimbatore India 2012
2 Powder Metallurgy Association of India (PMAI) India India 2009
 
Honors / Awards
Nr.TitlePlaceCountryDate
1 Invited Session Chair for National conference on Trends in Automotive Parts Systems and Applications (TAPSA 2013, 2014) Sri Krishna College of Engineering and Technology, Coimbatore, Tamilnadu India 2013
2 My Two Research Articles came under Top hottest 25 articles in ScienceDirect ScienceDirect Others 2011
3 International Journal(s) Reviewer Acting Reviewer for more than 10 International Journals (Elsevier-06) Others 2010onward
 
Conferences
Nr.ParticipationConference NameTitlePlaceCountryFundYear
1 Conference International Conference on Powder Metallurgy 2010 (PM10) Effect of grain refinement on workability of Al 6061 alloy reinforced with 10 wt.% TiO2 composite Powder Metallurgy Association of India (PMAI) India Others 2010
2 Conference International Conference on Powder Metallurgy 2009 (PM09) Influence of carbon content on workability behavior of powder metallurgy steels Powder Metallurgy Association of India (PMAI) India Others 2009
3 Conference National Conference of Emerging Materials and Technologies for India 2020 (EMT-INDIA 2020) Study on milling of glass fiber reinforced plastics (GFRP) composite National Institute of Technology, Tiruchirappalli India No 2008
4 Conference International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers Study on milling of glass fiber reinforced plastics (GFRP) composites Indian Institute of Technology Madras, Chennai India No 2008
5 Conference National Conference of Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007) Study of Milling of GFRP composite using statistical analysis (ANOVA) Bannary Amman Institute of Technology, Erode India No 2007
 
Publications
Nr.AuthorsPublication TitlePlace & DateStatus
1 A.Palanisamy,T.Selvaraj,S.Sivasankaran Heat-treatment effect on CNC turning of INCOLOY 800H superalloy Materials and Manufacturing Processes ,Vol.-- ,Issue--,ppt 1-8 2018 Applied
Fund(No)
2 Zahid Hussain,Fahad A. Al-Mufadi,S.Sivasankaran Microstructure and mechanical properties investigation on nanostructured Nickel 200 alloy using multi-axial forging Materials Science & Engineering A (Elsevier) ,Vol.712 ,Issue--,ppt 772–779 2018 Applied
Fund(QU)
3 S.Sivasankaran,Abdulaziz S. Alaboodi,Fahad Al-Mufadi Cold deformation of dezincification resistant yellow brass for plumbing applications MATERIALS AND MANUFACTURING PROCESSES (Taylor and Francis) ,Vol.-- ,Issue--,ppt 1-8 2018 Applied
Fund(QU)
4 A.Palanisamy,T.Selvaraj,S.Sivasankaran Optimization of Turning Parameters of Machining Incoloy 800H Superalloy Using Cryogenically Treated Multilayer CVD-Coated Tool Arabian Journal for Science and Engineering (Springer) ,Vol.-- ,Issue--,ppt 1-14 2018 Applied
Fund(No)
5 S.Sivasankaran,, Influence of strain rate and percent cold work on the hardness examination of commercial yellow brass International Conference on Innovations in Science and Technology in Civil Engineering (MRITCISTICE 2018) at Malla Reddy Institute of Technology, Hyderabad, India ,Vol.-- ,Issue--,ppt 1-3 2018 Applied
Fund(No)
6 R.Soundararajan,A.Ramesh,S.Sivasankaran Modeling and Analysis of Mechanical Properties of Aluminium Alloy (A413) Reinforced with Boron Carbide (B4C) Processed Through Squeeze Casting Process Using Artificial Neural Network Model and Statistical Technique Materials Today: Proceedings ,Vol.4 ,Issue2,ppt 2008-2030 2017 Applied
Fund(No)
7 A.Palanisamy,T.Selvaraj,S.Sivasankaran Taguchi-based grey relational analysis for modeling and optimizing machining parameters through dry turning of Incoloy 800H Journal of Mechanical Science and Technology (Springer) ,Vol.31 ,Issue9,ppt 4159–4165 2017 Applied
Fund(No)
8 S.Sivasankaran,, ALUMINIUM ALLOYS RECENT TRENDS IN PROCESSING, CHARACTERIZATION, MECHANICAL BEHAVIOR AND APPLICATIONS (Book) Intech Publisher ,Vol.- ,Issue-,ppt - 2017 Applied
Fund(No)
9 S.Sivasankaran,K.R.Ramikumar,Abdulaziz S. Alaboodi Strengthening Mechanisms on (Cu–10Zn)100?x–x wt% Al2O3 (x = 0, 3, 6, 9 and 12) Nanocomposites Prepared by Mechanical Alloying and Vacuum Hot Pressing: Influence of Reinforcement Content Transactions of the Indian Institute of Metals (Springer) ,Vol.70 ,Issue3,ppt 791–800 2017 Applied
Fund(No)
10 S.Sivasankaran,Abdulaziz S. Alaboodi , Structural Characterization and Mechanical Behavior of Al 6061 Nanostructured Matrix Reinforced with TiO2 Nanoparticles for Automotive Applications Functionalized Nanomaterials, ISBN 978-953-51-2856-4, Print ISBN 978-953-51-2855-7, 172 pages, Publisher: InTech, Chapters published ,Vol.01 ,Issue01,ppt 1-35 2016 Both
Fund(QU)
11 K.R. Ramkumar,S. Ilangovan,S. Sivasankaran Experimental investigation on synthesis and structural characterization of Cu-Zn-x wt%Al2O3 (x = 0, 3, 6, 9 & 12%) nanocomposites powders through mechanical alloying Journal of Alloys and Compounds ,Vol.688 ,Issue--,ppt 518-526 2016 Applied
Fund(Others)
12 D.Palanisamy,G.Ramesh,S.Sivasankaran Optimizing the Supercharger Effect on the Performance and Emission of Biogas Diesel Engine using ANFIS Asian Journal of Research in Social Sciences and Humanities ,Vol.6 ,Issue7,ppt 1364-1375 2016 Applied
Fund(No)
13 D.Palanisamy,G.Ramesh,S. Sivasankaran CFD ANALYSIS FOR HOMOGENOUS EFFECT OF BIOGAS AND AIR IN THE INTAKE MANIFOLD OF DUAL FUEL CI ENGINE International Journal of Advanced Engineering Technology ,Vol.7 ,Issue2,ppt 265-268 2016 Applied
Fund(No)
14 T.Prakash,P.Sasikumar,S.Sivasankaran The Influences of the Friction Stir Processing On the Microstructure and Hardness of Al7075 Aluminium Sheet Metal Reinforced with SiC / 3 % B4C Hybrid Surface Nanocomposite ADVANCES in NATURAL and APPLIED SCIENCES ,Vol.10 ,Issue6,ppt 21-25 2016 Applied
Fund(No)
15 Duraisamy Palaniswamy,Gurusamy Ramesh,Subbarayan Sivasankaran Optimising biogas from food waste using a neural network model Municipal Engineer, ICE Publishing, England ,Vol.-- ,Issue--,ppt -- 2016 Applied
Fund(No)
16 S.Jeyaraj,K.P.Arulshri,S.Sivasankaran Investigations on effect of process parameters of electrodeposited Ni - Al2O3 composite coating using orthogonal array approach and mathematical modeling International Journal of Archives of Civil and Mechanical Engineering (Elsevier) ,Vol.16 ,Issue1,ppt 168-177 2016 Applied
Fund(No)
17 R.Soundararajan,A.Ramesh,P.Saravanakumar Effect of Squeeze casting parameters on surface roughness of A413 alloy and A413-B4C composites using full factorial design International Conference on Technological Advancements in Materials and Manufacturing for Industrial Environment (TAMMIE 16) ,Vol.-- ,Issue--,ppt 163 2016 Applied
Fund(No)
18 T. Prakash,P. Sasikumar,S.Sivasankaran Experimental Investigation of Friction Stir Processed Al7075 aluminium plate reinforced with Al2O3/1%Gr hybrid surface nanocomposite Technological Advancements in Materials and Manufacturing for Industrial Environment (TAMME 16) ,Vol.-- ,Issue--,ppt 95 2016 Applied
Fund(No)
19 T. Prakash,P. Sasikumar,S.Sivasankaran Experimental Investigation of Friction Stir Processed Al7075 Aluminium Plate Reinforced with Al2O3 / 1 % Gr Hybrid Surface Nanocomposite Asian Journal of Research in Social Sciences and Humanities ,Vol.6 ,Issue7,ppt 892-901 2016 Applied
Fund(No)
20 K.R.Ramkumar,Habtamu Bekele,S.Sivasankaran Experimental Investigation on Mechanical and Turning Behavior of Al 7075/x%wt. TiB2-1% Gr In Situ Hybrid Composite Advances in Materials Science and Engineering ,Vol.2015 ,Issue1,ppt 1-14 2015 Applied
Fund(No)
21 R.Soundararajan,A.Ramesh,S.Sivasankaran Modeling and analysis of mechanical properties of aluminium alloy (A413) processed through squeeze casting route using artificial neural network model and statistical technique Advances in Materials Science and Engineering ,Vol.2015 ,Issue1,ppt 1-17 2015 Applied
Fund(No)
22 D. Jeyasimman,K. Sivaprasad,S.Sivasankaran Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by ?-Al2O3 nanoparticles Advanced Powder Technology (Elsevier) ,Vol.26 ,Issue1,ppt 139-148 2015 Applied
Fund(Others)
23 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of coarse grain matrix content on the mechanical behavior of trimodaled AA 6061-TiO2 nanocomposite prepared by mechanical alloying International Journal of Advanced Manufacturing Technology (Springer) ,Vol.78 ,Issue--,ppt 385-394 2015 Applied
Fund(Others)
24 S.Sivasankaran,P.T. Harisagar,E. Saminathan Effect of Nose Radius and Graphite Addition on Turning of AA 7075-ZrB2 in-situ Composites Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 582-589 2014 Applied
Fund(No)
25 S.Sivasankaran,P.T. Harisagar,E. Saminathan Effect of process parameters in surface roughness during turning of GFRP pipes using PCD insert tool Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 64-71 2014 Applied
Fund(No)
26 A. Saravanakumar,P. Sasikumar,S.Sivasankaran Synthesis and Mechanical Behavior of AA 6063-x wt. % Al2O3-1% Gr (x = 3, 6, 9 and 12 wt. %) Hybrid Composites Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 951-960 2014 Applied
Fund(No)
27 A. Saravanakumar,P. Sasikumar,S.Sivasankaran Effect of Graphite Particles in Drilling of Hybrid Aluminum Matrix Composite Procedia Engineering (Elsevier) ,Vol.97 ,Issue--,ppt 495-504 2014 Applied
Fund(No)
28 A.R.Danavignesh,S.Siddarda,S.Karthickeyan Performance Testing of Diesel Engine with TiO2 coated Engine Parts International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue2,ppt 1-5 2014 Applied
Fund(No)
29 S.Sasikumar,K.R.Ramkumar,S.Iniyan Study of Mechanical and Machining behavior of AA 7075-3% TiB2 in-situ composite International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue3,ppt 1229-2235 2014 Applied
Fund(No)
30 V.Santhosh Cibi,K.Gokulraj,P.Kathiravan Convective heat transfer enhancement of graphite nanofluids in shell and tube heat exchanger International Journal of Innovative Research in Science, Engineering and Technology ,Vol.3 ,Issue2,ppt 270-276 2014 Applied
Fund(No)
31 D. Jeyasimman,S.Sivasankaran,K. Sivaprasad An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying Materials & Design (Elsevier) ,Vol.57 ,Issue--,ppt 394-404 2014 Applied
Fund(Others)
32 D. Jeyasimman,K. Sivaprasad,S.Sivasankaran Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes Powder Technology (Elsevier) ,Vol.258 ,Issue--,ppt 189-197 2014 Applied
Fund(Others)
33 T. Prakash,P. Sasikumar,S. Sivasankaran Investigations on the microstructure and mechanical property of friction stir processed AA6061 aluminium sheet metal reinforced with Al2O3 surface composite International Journal of Materials Engineering Innovation ,Vol.5 ,Issue3,ppt 192-204 2014 Applied
Fund(No)
34 A.Palanisamy,R.Rekha,S.Sivasankaran Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V) Applied Mechanics and Materials, Trans Tech Publications ,Vol.592-5 ,Issue--,ppt 540-544 2014 Applied
Fund(No)
35 S.Sivasankaran,E.Saminathan,S.Sidharth Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB2 in-situ metal matrix composites Procedia Materials Science (Elsevier) ,Vol.5 ,Issue--,ppt 2122-2131 2014 Applied
Fund(Others)
36 T. Prakash,S.Sivasankaran,P.Sasikumar Mechanical and Tribological Behaviour of Friction Stir Processed Al6061 Aluminium Sheet Metal Reinforced with Al2O3/0.5 Gr Hybrid Surface Nanocomposite Arabian Journal for Science and Engineering ,Vol.40 ,Issue2,ppt 559-569 2014 Applied
Fund(No)
37 S.Iniyan,S.Sasikumar,K.R.Ramkumar Study of mechanical and machining behavior of AA 7075-3%TiB2 in-situ composites International Conference on Innovation in Engineering and Technology (ICIET’ 14) ,Vol.-- ,Issue--,ppt -- 2014 Applied
Fund(No)
38 M.Gowthaman,S.Iniyan,K.R.Ramkuimar Study of mechanical behiaviour of Al 7075-x% TiB2-1% Gr hybrid in-situ composite International Conference on Advanced Design and Manufacturing-2014 ,Vol.-- ,Issue--,ppt -- 2014 Applied
Fund(No)
39 S.Karthickeyan,S.Siddarda,A.R.Danavignesh Performance testing of diesel engine with modified piston bowl and varied injection pressures International Conference on Advanced Design and Manufacturing-2014 ,Vol.-- ,Issue--,ppt -- 2014 Applied
Fund(No)
40 S.Sivasankaran,E.Saminathan,S.Sidharth Effect of Graphite addition on surface roughness during turning of AA 7075-ZrB2 in-situ metal matrix composites International Conference on Advances in Manufacturing and Materials Engineering (AMME 2014) ,Vol.-- ,Issue--,ppt -- 2014 Applied
Fund(Others)
41 S.Karthickeyan,S.Siddarda,A.R.Danavignesh Performance testing of diesel engine with ceramic coated combustion chamber part and varied injection pressure National Conference on Recent Trends in Mechanical Engineering ,Vol.-- ,Issue--,ppt -- 2014 Applied
Fund(No)
42 V.Sriram,A.Muthukumar,S.Balumahendran Synthesis, characterization and mechanical behaviour of AA 6063-x wt. % TiB2 (0, 2, 4 and 6 wt. %) in-situ composites International Conference on Advanced Manufacturing and Automation INCAMA-2013 ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(Others)
43 K.R.Ramkumar,S.Sasikumar,S.Karthikeyan Investigation on mapping behavior of cutting force with cutting parameters of AA 6063 Al alloy in turning International Conference on Advances in Energy Engineering (ICAEE-2013) ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(Others)
44 S.Sivasankaran,S.Nakul Sreedhar,S.Dineshkumar Die design for homogeneous plastic deformation during ECAP and investigation of mechanical properties of pure aluminium and copper rods International Conference on Computational intelligence & Advanced Manufacturing research ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(No)
45 S.Sivasankaran,A.Govindaraj,S.Muthukumar Mechanical behavious of friction stir processed AA6061 with Al2O3-Gr nanocomposites National Conference on frontiers in Mechanical Sciences and Automation Technology ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(No)
46 S.Sivasankaran,E.Baskaran,S.Pranesh Some investigation on mechanical properties of Al 6063 alloy during multiaxial forging National Conference on “Advances and Challenges in Mechanical Engineering – ACME 2013 ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(No)
47 S.Sivasankaran,E.Baskaran,S.Pranesh Warm multiaxial forging of Aluminium (6063) alloy National Conference on “Recent trends in mechanical engineering-RTME 2013” ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(No)
48 S.Sivasankaran,S.Dinesh,V.Sriram Investigation of cutting forces of AA 6063 and AA 6063-6% ZrB2 National conference on Recent advances in Design, Applications and Manufacturing Systems (RADAMS-13) ,Vol.-- ,Issue--,ppt -- 2013 Applied
Fund(No)
49 V.Sriram,S.Dineshkumar ,S.Sivasankaran Severe Plastic Deformation: An Overview Advanced materials and Processing Technologies -2012 ,Vol.-- ,Issue--,ppt -- 2012 Applied
Fund(No)
50 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061 – TiO2 nanocomposite prepared by mechanical alloying Materials Science and Engineering A (Elsevier) ,Vol.528 ,Issue22,ppt 6776-6787 2011 Applied
Fund(Others)
51 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy X-ray peak broadening analysis of AA 6061100-x-x wt. % Al2O3 nanocomposite prepared by mechanical alloying Materials Characterization (Elsevier) ,Vol.62 ,Issue7,ppt 661-672 2011 Applied
Fund(Others)
52 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061100 ? x–x wt.% TiO2 nanocomposites prepared by mechanical alloying Powder Technology (Elsevier) ,Vol.209 ,Issue1,ppt 124-137 2011 Applied
Fund(Others)
53 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA 6061-10 wt.% TiO2 composite prepared by mechanical alloying Journal of Alloys and Compounds (Elsevier) ,Vol.507 ,Issue1,ppt 236–244 2010 Applied
Fund(Others)
54 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy An investigation on flowability and compressibility of AA 6061100 ? x-x wt.% TiO2 micro and nanocomposite powder prepared by blending and mechanical alloying Powder Technology (Elsevier) ,Vol.201 ,Issue1,ppt 70-82 2010 Applied
Fund(Others)
55 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Synthesis, structure and sinterability of 6061 AA100?x–x wt.% TiO2 composites prepared by high-energy ball milling Journal of Alloys and Compounds ,Vol.491 ,Issue1,ppt 712-721 2010 Applied
Fund(Others)
56 G. Naveen Kumar,R.Narayanasamy,S. Natarajan Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature Materials & Design (Elsevier) ,Vol.31 ,Issue3,ppt 1526-1532 2010 Applied
Fund(Others)
57 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Synthesis and characterization of mechanically alloyed AA 6061 reinforced with 12 wt.% Al2O3 nanocrystalline powders International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 Applied
Fund(Others)
58 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Effect of grain refinement on workability of Al 6061 alloy reinforced with 10 wt.% TiO2 composite International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 Applied
Fund(Others)
59 S.Sivasankaran,K. Sivaprasad,R. Narayanasamy Isotropic and anisotropic X-ray peak broadening models of AA 6061-12 wt. % TiO2 nanocomposite International Conference on Powder Metallurgy 2010 (PM10) ,Vol.-- ,Issue--,ppt -- 2010 Applied
Fund(Others)
60 R.Narayanasamy,K. Sivaprasad,V.Anandakrishnan Mechanical Alloying of Aluminium based-metal matrix composites: A Review 2nd International conference on Recent Advances in Material Processing Technology (RAMPT 2009) ,Vol.-- ,Issue--,ppt -- 2009 Applied
Fund(Others)
61 R.Narayanasamy,V. Anandakrishnan,S.Sivasankaran Influence of carbon content on workability behavior of powder metallurgy steels International Conference on Powder Metallurgy 2009 (PM09) ,Vol.-- ,Issue--,ppt -- 2009 Applied
Fund(Others)
62 S.Sivasankaran,R.Narayanasamy,R. Jeyapaul Modelling of wrinkling in deep drawing of different grades of annealed commercially pure aluminium sheets when drawn through a conical die using artificial neural network Materials & Design (Elsevier) ,Vol.30 ,Issue8,ppt 3193-3205 2009 Applied
Fund(No)
63 R.Narayanasamy,V. Anandakrishnan,S. Sivasankaran Influence of carbon content on workability behavior of powder metallurgy steels Transactions of PMAI ,Vol.35 ,Issue--,ppt 26-31 2009 Applied
Fund(No)
64 S.Sivasankaran,R.Narayanasamy,T. Ramesh Analysis of workability behavior of Al–SiC P/M composites using backpropagation neural network model and statistical technique Computational Materials Science (Elsevier) ,Vol.47 ,Issue1,ppt 46-59 2009 Applied
Fund(Others)
65 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study on milling of glass fiber reinforced plastics (GFRP) composite National Conference of Emerging Materials and Technologies for India 2020 (EMT-INDIA 2020) ,Vol.-- ,Issue--,ppt -- 2008 Applied
Fund(No)
66 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study on milling of glass fiber reinforced plastic (GFRP) composite International Conference on Advances in Manufacturing Technology (ICAMT 2008) for Young Engineers ,Vol.-- ,Issue--,ppt -- 2008 Applied
Fund(Others)
67 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Investigation On End Milling Of Glass Fiber Reinforced Plastics (Gfrp) Composites Proceeding of All India seminar on “Automation Trends in Manufacturing Industries: Cutting Edge Technologies & their Impact ,Vol.-- ,Issue--,ppt 29-36 2008 Applied
Fund(No)
68 S.Sivasankaran,K.Pannerselvam,A.Noorulhaq Study of Milling of GFRP composite using statistical analysis (ANOVA) National Conference of Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007) ,Vol.-- ,Issue--,ppt 177-181 2007 Applied
Fund(No)
 
Thesis Supervision
Nr.DegreeTitlePlaceCountryRegistraion YearAward Year
1 M.Sc EXPERIMENTAL INVESTIGATION ON MECHANICAL, TRIBOLOGICAL AND MACHINING BEHAVIOR OF Cu-Zn-Al2O3 NANOCOMPOSITE PREPARED BY MECHANICAL ALLOYING AND HOT-PRESSING AMRITA SCHOOL OF ENGINEERING, COIMBATORE AMRITA VISHWA VIDYAPEETHAM COIMBATORE-641 112 India 2014 2016